ScanExpress Logo - mobile industrial CT by Microvista

RENTABLE MOBILE INDUSTRIAL CT
FOR NON-DESTRUCTIVE QUALITY INSPECTION

100% Qual­i­ty approved — Fast. Any­time. Anywhere.

Cus­tomi­sa­tion

CT set­up adapt­ed to your needs of qual­i­ty check and evaluation.

No logis­tic effort

Make it part of your pro­duc­tion line — no logis­tic effort needed

Ful­ly Automatic

Direct­ly after the inspec­tion you will receive the ful­ly auto­mat­ed eval­u­a­tion in the form of a report.

Plug&Play

Just one plug inser­tion and easy sys­tem cal­i­bra­tion keeps you from get­ting started.

Pilot Customer - Quality Inspection with a mobile CT (ScanExpress)

Trans­portable

Rent it at every loca­tion for as long as you need it.

Pilot Customer - Quality Inspection with a mobile CT (ScanExpress)
0 + YEARS

Experience as a CT service provider 

Dare

Not a capable & controlled process?
Microvista aids! 

3 reasons how this be a thing of the past:

1.

Dri­ves to you on request & stays just as long as required
(No high wait­ing times & invest­ment costs for a sta­tion­ary CT)

2.

Ful­ly auto­mat­ed just-in-time inspec­tion with AI

3.

Results direct­ly in the pro­duc­tion line

Capable & controlled process because of quality inspection with the rentable industral mobile CT (Scan Express)
Service

CT inspection directly
in front of the door 

Mobile CT Scanner benefits 

A 40-foot CT sys­tem enables rapid inspec­tion of com­po­nents direct­ly at the pro­duc­tion site

Ship­ping time and costs are eliminated

CO2 emis­sion is high­ly reduced

Flex­i­ble planning

CT Scanner Facts 

Pro­vi­sion of con­tain­er CT includ­ing adapt­ed eval­u­a­tion algorithms

Min­i­mum rental peri­od: 4 weeks

Pow­er con­nec­tion 400 V / 63 A via CEE required

Deliv­ery of a suit­able work­piece carrier

Avail­abil­i­ty depend­ing on demand

Cases

The industries we work with: 

ross-parmly-rf6ywHVkrlY-unsplash

Aerospace


 

Medical

Medical technology


 

d

Automobile


 

m

Light metal casting


 

pexels-bence-szemerey-6804254

Heavy metal casting


 

bat

Battery systems


 

pexels

Additive manufacturing


 

Tasks

What are our services? 

Defect analysis

3D Pores

Machin­ing surfaces

Com­pli­ant with standards

Dimensions

Wall thick­ness­es

CAD target/actual comparison

Assembly & Joining

Com­plete­ness

Ini­tial sam­ple test report

Cor­rect fit

Joints (weld­ing, riv­et­ing, gluing)

Key features

What challenges
can be solved quickly
with CT scanning: 

Mon­i­tor­ing of new, tech­no­log­i­cal­ly chal­leng­ing pro­duc­tion processes

Spot checks up to 100% inspec­tion, e.g. dur­ing the start-up phase of a new product

Opti­miza­tion of a high reject rate despite SOP

Prompt release of blocked batch­es with unclear quality

Pre­ven­tion of refine­ment of rejects downstream

Pre­ven­tion of com­po­nents destruc­tion for sta­tis­ti­cal purposes

Key features

What challenges
can be solved quickly
with CT scanning: 

Mon­i­tor­ing of new, tech­no­log­i­cal­ly chal­leng­ing pro­duc­tion processes

Spot checks up to 100% inspec­tion, e.g. dur­ing the start-up phase of a new product

Opti­miza­tion of a high reject rate despite SOP

Prompt release of blocked batch­es with unclear quality

Pre­ven­tion of refine­ment of rejects downstream

Pre­ven­tion of com­po­nents destruc­tion for sta­tis­ti­cal purposes

Background industry look for mobile industrial CT website
Lutz Hagner the CEO of Microvista a provider of non-destructive testing with industrial CT
Prof. Dr

Lutz Hagner 

„Our mobile CT is designed as a prob­lem solver. Wher­ev­er inten­sive qual­i­ty inspec­tion is need­ed tem­porar­i­ly, often unex­pect­ed­ly, it is avail­able to our cus­tomers in a short peri­od of time.“

Contact

Ask us about CT scanning for your company! 

    Data protection

    Meet us in social media 

    Visit us in our headquarters 

    Automated inspection of hairpins

    Challenge:

    The stability of the hairpin joint is crucial for the reliability of electrically powered vehicles. Laser welding can be carried out according to different principles. However, this can affect the quality of the joint by process fluctuations resulting in undesired deviations.

    Possible consequences:
    Due to ambiguity in the quality of joints, high
    failure rates can occur.

    Advantages of a CT inspection:

    • Quality feedback within minutes
    • Statistically evaluable results thanks to Microvista's automatic analysis: 40 stators/day inspected
    • Only 165 €/part including an informative report.
    blank
    CT Scan exposing a burnt out battery

    Warning: explode() expects parameter 2 to be string, array given in /home/www/mobile-ct_eu/wp-content/plugins/stal-core/inc/shortcodes/image-gallery/image-gallery.php on line 128

    Warning: Invalid argument supplied for foreach() in /home/www/mobile-ct_eu/wp-content/plugins/stal-core/inc/shortcodes/image-gallery/image-gallery.php on line 133
    Pore analysis of a cylinder head

    Challenge:

    In order to achieve the highest possible ranges as well as low emissions, lightweight construction continues to be a primary goal in vehicle construction, regardless of the type of drive. Light metal casting is characterised by its ability to produce complex parts with a high degree of automation and recyclability. However, high technological demands are placed on the components, including mechanical load-bearing capacity under more complex stresses and simultaneous mass reduction.

    Potential consequences:

    A cylinder with poor quality leads to damage to the cooling system and ultimately to engine failure.

     

    Advantages of a CT inspection:

    • Visualisation of pores in the cylinder head and colour classification of the pores according to their volume is possible.
    •  The exact position of each pore and thus the potential risk it poses can be determined.
    blank
    Testing of wall thicknesses of an exhaust manifold.

    Challenge:

    The exhaust manifold is one of the most heavily loaded components of an engine. For this reason, the actual and desired condition of the wall thickness should be compared. Only with a sufficient wall thickness can the manifold withstand the shock-like inflow of exhaust gases and the resulting pressure front, as well as the many heating and cooling cycles in the long term.  

    Possible consequences of undetected deviations:

    The notch effect of blowholes can cause a crack in the manifold. Partial breakthroughs can also occur if the wall thickness is too small. This leads to a change in the pressure conditions in the manifold, which reduces engine performance and, at the same time, increases fuel consumption. In addition, there is a high noise level from the direction of the engine and a clearly perceptible exhaust smell in the interior.

    Advantages of a CT inspection:

    • Fast and automatic detection of relevant quality defects 
    • Avoidance of scrap refinement 
    • Detection of defect focal points through statistical evaluation of the results.
    blank
    CT Scan exposing a burnt pores in aluminium wheel
    Assembly inspection of lithium-ion batteries.

    Challenge:

    Due to production or assembly errors, the contact, insulation and electrolyte foil is damaged in some batteries.

    Possible consequences:

    A short circuit can be the result. This can lead to a high thermal reaction of the electrolyte. The resulting outgassing causes the battery to swell externally. Inflated, deformed, outgassed lithium-containing batteries can lead to explosions and fires.

    Advantages of CT testing:

    • Dismantling of batteries in small devices is not necessary for the test. The devices can therefore be used immediately after the test
    • By sorting out defective batteries, higher quality can be guaranteed, and prevention against legal disputes and negative press in case of a fire can be operated
    blank
    CT Scan exposing a burnt out battery
    Comprehensive inspection of an aluminium wheel carrier with complex bionic structure.

    Challenge:

    Additive manufacturing requires carefully set process parameters that are optimised in iterative steps during the product development process. Fast and comprehensive feedback on product quality is of paramount importance for shortening the development phase.

    Possible consequences of undetected defects:

    Missing and insufficiently validated process quality can result in high reject rates. Especially with regard to safety-relevant parts of the chassis, additional risks arise that can lead to component failure and create the risk of an accident.

    Advantages of CT inspection:

    • Shortened development cycles
    • Addressing risks identified by FMEA
    • Reduction of required expensive prototypes through non-destructive testing for a variety of features.
    Comprehensive inspection of an aluminium wheel carrier with complex bionic structure.

    Challenge:

    Additive manufacturing requires carefully set process parameters that are optimised in iterative steps during the product development process. Fast and comprehensive feedback on product quality is of paramount importance for shortening the development phase.

    Possible consequences of undetected defects:

    Missing and insufficiently validated process quality can result in high reject rates. Especially with regard to safety-relevant parts of the chassis, additional risks arise that can lead to component failure and create the risk of an accident.

    Advantages of CT inspection:

    • Shortened development cycles
    • Addressing risks identified by FMEA
    • Reduction of required expensive prototypes through non-destructive testing for a variety of features.
    blank
    A CT scan of insulation foam
    Assembly inspection of medical devices

    Challenge:

    To detect malfunctions, damage or collisions that cannot be traced after disassembly of the medical device. 

    Possible consequences:

    Blockages can cause some devices to malfunction during use.

    Advantages of a CT scan:
    Complete digitisation takes place without the application of force during the measurement, which makes it possible to measure, analyse as well as subsequently process filigree and soft components. The inspection takes place quickly and reliably in the assembled state. During the evaluation, the movements in the component can be recorded, whereby the blockage can be found.

    blank
    A CT scan of XXX XXX